Triaxial Slide Rail Retractor Reinforced Cnc Vertical Machining Center ForReaming Automatic Processing Cycle
=
Advantage
1. TE series spindle adopts advanced precision grade P4 bearings, with high rigidity and heavy cutting featuring. The standard speed is up to 10000 RPM (BT40);
2.In spindle box, rib is reinforced to strengthen the contact surface between spindle box and column and provides great support.
3. The Z axle is designed without counterweight, and the brake servo motor is directly driven to reduce vibration and enhance the reaction force of the machine tool.
4. Sealed sheet metal and excretion inside the multi head drilling machine;
5. The operation panel can achieve rotation from 0 to 90 degree, thus increasing operability. It also enables operators to increase comfort during work and achieve maximum efficiency.
6. Urgent stop button in set on the CNC machine center body, it is for easy. It is convenient installing and regulating.
Specifications
| Type | unit | DHVMC-850 |
| Table size | mm | 1000*500 |
| Max. load of worktable | kg | 400 |
| T slot no./width/distance | mm | 18x5x90 |
| X axis travel | mm | 800 |
| Y Axis travel | mm | 500 |
| Vertical travel | mm | 500 |
| spindle nose to table surface | mm | 150-650 |
| spidle axis to column surface | mm | 572 |
| Speed Range | rpm | 10,000 |
| Spindle taper | Type | BT-40 |
| Spindle head casing aperture | mm | φ140mm |
| Spindle driver | - | Belt transmission |
| Maximum tool diameter | mm | Φ80(Φ130) |
| Maximum tool length | mm | 300 |
| Maximum tool weight | kg | 8 |
| Shank | Type | BT-40 |
| Tool magazine capacity | Pieces | 24 |
| Tool exchange method | - | Knife arm |
| Tool exchange time (knife-to-knife) | Sec | 1.8 |
| Rivet | Type | P40-1( 45°) |
| Controller | | Syntec 22MA |
| Spindle motor (continuous / 15 minutes) | kW | 7.5/11 |
| Servo motor (X/Y/Z) | kW | 2.6/2.6/3.0 |
| Automatic lubrication device | w | 35 |
| Cutting fluid pump | w | 840 |
| battery capacity | kVA | 25 |
| Air source pressure demand | kg/cm | 6 |
| Cutting water tank capacity | L | 250 |
| positioning accuracy | mm | 0.01 |
| Repeatability accuracy | mm | 0.008 |
| Floor area and height | mm | 2550*2250*2400 |
| Machine weight | kg | 5000 |
Machine Details
Auto Chip conveyor
The device has the advantages of serialization, generalization and standardization, simple operation, reliable operation, convenient disassembly and assembly, and easy maintenance. It can also be used in conjunction with other chip evacuation devices to form a variety of cutting arrangements.
1. It can handle all kinds of chips; it can also be used as a conveying device for small parts of stamping and cold pier machine tools.
2. With overload protection;
3. The width of the chain plate is diversified, and the structural form is divided into two types: a seamless chain plate and a seam chain plate. 4, streamlined shape, beautiful appearance, smooth chip removal.
4. High conveying efficiency and large selection range of conveying speed.
BT-40-8000RPM KENTURN
The KENTURN CNC machining center spindles are very hard with very low runout tolerances and speeds up to 10,000 rpm. These high-precision, high-speed spindles are available in a range of sizes and are guaranteed to provide smooth operation and long life.
Cutting coolant system
The cutting coolant system uses the internal circulation of the machine to provide good cooling for the spindle. The system consists of cutting fluid, coolant pump, coolant tank, coolant delivery and recovery device, and purification device. It also has the function of lubrication and rust prevention while cooling.
Triaxial slide rail retractor
The machine guard is used to protect the machine guide rails. He protects the machine's internal hard rails, linear guides and ball screws or drive racks from external corrosion and damage. It can effectively prevent the entry of chips and other sharp objects, and can effectively reduce the penetration of coolant through certain structural measures and suitable scraping plates.
The steel plate shield
has a good seal and can prevent iron filings, anti-cooling liquid and anti-tool accidents.
1. Sturdy and durable, stable operation, low noise and beautiful appearance;
2. On the basis of the original sealing strip, a layer of stainless steel cover is added to prevent the high temperature burn strip of iron filings from rubbing into the rail surface and pulling the guide rail;
3. Steel plate shield is suitable for high-speed motion machine tool rail protection is stable and no vibration noise;
4. The steel plate cover device not only protects the service life of the guard plate, but more importantly ensures the precision of the machine tool;
5, the steel plate shield will not make the guard plate disjointed, there is impact sound, both beautiful and improve the service life of the guard plate;
6. Each guard plate of the steel plate shield is pulled apart in parallel at the same time, and is simultaneously retracted in parallel, and runs freely.
Full cover shroud
The utility model comprises a lower protective front baffle, a lower protective left baffle, a lower protective tail baffle, a lower protective right baffle, an upper protective front panel, an upper protective left panel, an upper protective rear panel and an upper protective right panel, the lower protective front The baffle, the lower protective left baffle, the lower protective baffle and the lower protective right baffle are sequentially connected to form a rectangular lower protective frame, the upper protective front panel, the upper protective left panel, the upper protective rear panel and the upper protective right The panels are sequentially connected to form a rectangular upper protective frame placed on the rectangular lower protective frame and connected to each other; the upper protective front plate is provided with a front window, and the front window is provided with a laterally laterally outer side Door, left inner door, right inner door and right outer door. The utility model has the advantages of simple structure, reasonable design, effective protection for the processing center, convenient opening, and favorable daily maintenance operation.
Hiwin rail
Due to the rolling friction method, when the linear guide is used as the linear guide, not only the friction coefficient is reduced to 1/50 of the sliding guide, but also the difference between the dynamic friction and the static friction is small. Therefore, when the bed is running, there is no slippage, the positioning accuracy of μm can be achieved, and the machine can maintain the accuracy for a long time. The power loss of the machine can be significantly reduced, and the heat generated by the friction is small, which is suitable for high-speed operation. The special beam structure design can bear the load in the up, down, left and right directions at the same time. Easy to assemble, it maintains accuracy and is interchangeable, allowing you to replace sliders or rails or even linear guide sets. The lubrication structure is simple and easy to oil.
Triaxial slide rail retractor
The machine guard is used to protect the machine guide rails. He protects the machine's internal hard rails, linear guides and ball screws or drive racks from external corrosion and damage. It can effectively prevent the entry of chips and other sharp objects, and can effectively reduce the penetration of coolant through certain structural measures and suitable scraping plates.
The steel plate shield has a good seal and can prevent iron filings, anti-cooling liquid and anti-tool accidents.
1. Sturdy and durable, stable operation, low noise and beautiful appearance.
2, steel plate shield is suitable for high-speed motion machine tool rail protection is stable and no vibration noise.
3. The steel plate cover device not only protects the service life of the guard plate, but more importantly ensures the precision of the machine tool.
4. Each guard plate of the steel plate shield is pulled apart in parallel at the same time, and is simultaneously retracted in parallel, and runs freely.
5, the steel plate shield will not make the guard plate disjointed, there is impact sound, both beautiful and improve the service life of the guard plate.
6. On the basis of the original sealing strip, a layer of stainless steel cover is added to prevent the high temperature burn strip of iron filings from rubbing into the rail surface and pulling the guide rail.
Product Tags:
|
|
Triaxial Slide Rail 3 Axis Vertical Machining Center For Reaming Automatic Processing Cycle Images
|
